Da Vinci Jr. 1.0

Da Vinci Jr. 1.0

Availability: In Stock



da Vinci Jr.

advance of da vinci junior 1.0

Big Things Come in

Small Packages


Don’t let its slimmer and lighter look fool you, the da Vinci Jr. has a robust build size of 5.9 x 5.9 x 5.9 inches and a resolution of 100 to 400 microns. Its design allows for the inclusion of an auto-feeding filament system, which takes the PLA filament to the extruder, and ensures that the filament is loaded properly and is ready to print.

advance of da vinci junior 1.0




Traditional 3-to-4 knob calibrations on the beds of 3D printers are complicated, but with the da Vinci Jr. 1.0, the print bed is already completely leveled and it only requires a Z Offset calibration. With the Z Offset calibration, you can adjust the distances between the extruder and the print bed, making sure that each print comes out perfectly.

advance of da vinci junior 1.0

Just Press

and Release!


The da Vinci Jr. features a fluid, press-and-release extruder which makes for an easy extruder replacement or cleaning experience. Simply open up your 3D printer, press the release button, and the replacement or cleaning process can be done within few seconds.

advance of da vinci junior 1.0

Print Smart,

Print Green


The da Vinci Jr.’s PLA filament spools are a non-toxic, biodegradable plastic that is recyclable and safe for the environment! With its compact design, the da Vinci Jr. only consumes 75 watts of power. This eco-friendly 3D printer makes sure that nothing goes to waste.

advance of da vinci junior 1.0

The #1 3D Printer

for Homes and Schools


With its completely enclosed designed and non-heated print tray, the da Vinci Jr. 1.0 is built with your safety in mind. Kids, beginners, and Makers can all enjoy countless hours of 3D printing. The EZ-Offset Calibration makes it easy to get perfect prints every time, while the auto-feeding filament system and easy-to-install filament spools save you time on getting your first project started.


Additional Information

Layer resolution:
0.4 mm nozzle: 100 to 400 micron
0.40 mm nozzle: 400 to 100 micron
Maximum Build volume:
Recommended filament diameter:
1.75 mm
Nozzle diameter:
Included 0.4 mm nozzles
Maximum Printing Speed:
up to 100mm/s
Print technology:
Fused filament fabrication (FFF)
Print Head:
Single Nozzle
Filament Material:
USB 2.0,SD card
File Types:
.stl , XYZ Format (.3w)
Package Dimension:
54.7 x 58.1 x 47.5 cm